Manualshelf

Use and Care Manual

ManualsBrandsDSI LIGHTING ManualsFlush Mount Ceiling LightsSolero 13 in. 3-Light Bronze and Antique Brass Flush Mount with Clear Shades
12345678
Installation (continued)
C
B
A
A
HH
DD
CC
6
4
Assembling the xture body to the
outlet box
6
Installing the light bulbs
□ Place the xture body (A) over the outlet box, let the threaded
tube (CC) come through the hole of the canopy of the xture
body (A), then tighten the hex nut (DD) and nial (HH) to the
protruding threaded tube (CC) on mounting strip (AA) until
the canopy of the xture body (A) is held rmly against the
ceiling.
□ Unscrew the socket ring (C) from the socket of the xture body
(A), place the glass shade (B) over the socket and secure with
the socket ring (C).
□ Repeat this step on the other glass shades.
5
Installing the glass shades
□ Install the light bulbs (not included) into the sockets. Use
three 60W maximum medium base (E26) type “ST64” bulbs.
NOTE: You can also use three 60W maximum medium
base (E26) type “A” bulbs or 9W maximum medium base
(E26) self-ballasted LED bulbs (sold separately). Do not
exceed the recommended wattage.
A