Instructions / Assembly
Installation (continued)
□ Raise the canopy (KK) all the way up to the ceiling, and tighten the ring (II) onto the screw collar loop (HH) until the canopy (KK) is
rmly held against the ceiling.
8
Installing the canopy to the outlet box
II
KK
HH
B
7
□ Install the light bulbs (not included) into the sockets. Use ve 60W maximum medium base (E26) type “ST64” bulbs.
9
Installing the light bulbs
NOTE: You can also use five 60W maximum medium base (E26) type "A" bulbs or 9W maximum medium base (E26)
self-ballasted LED bulbs (sold separately). Do not exceed the recommended wattage.