Use and Care Manual

Installation (continued)
□ Raise the canopy (KK) all the way up to the ceiling, and tighten the ring (II) onto the screw collar loop (HH) until the canopy (KK) is
rmly held against the ceiling.
8
Installing the canopy to the outlet box
II
KK
HH
B
7
□ Install the light bulbs (not included) into the socket. Use three 60W maximum candelabra base (E12) type “B” bulbs.
9
Installing the light bulbs
NOTE: You can also use three 9W maximum candelabra base (E12) self-ballasted LED bulbs (sold separately). Do not
exceed the recommended wattage.