Use and Care Manual

Installation (continued)
6
□ Place the xture body (B) over the outlet box, and ensure the heads of the support screws (long) (CC) come through the holes of the
xture body (B).
□ Tighten the cap nuts (GG) onto the protruding support screws (long) (CC) on the mounting bracket (AA) until the xture body (B) is held
rmly against the wall.
4
Assembling the canopy assembly to the outlet box
5
Installing the light bulb and glass shade
B
A
B
GG
CC
AA
□ Install the light bulbs (not included) into the sockets. Use one
60-watt candelabra base (E12) type “B” bulb (recommended).
□ Place the glass shade (A) into the frame of the xture body (B)
as shown in the diagram.
NOTE: You can also use one 9W maximum candelabra
base (E12) self-ballasted LED bulbs (sold separately). Do not
exceed the recommended wattage.