Instructions / Assembly

Installation

□ Unscrew the four support screws (short) (CC) from the

mounting bracket (AA). Remove the mounting bracket

(AA) from the canopy of the xture body (C) and keep the

mounting bracket (AA) and four support screws (short) (CC)

for later use.

□ Fasten the mounting bracket (AA) onto the outlet box using

two outlet box screws (long) (BB).

Preparing the mounting bracket

Installing the mounting bracket

AA BB

□ Strip 3/4 in. of insulation from the wire ends.

□ Connect the black wire from the xture to the black wire from the outlet box, then connect the white wire from the xture to the

white wire from the outlet box.

□ The bare copper ground wire from the xture must loop one turn under the head of the green ground screw (DD) on the mounting

bracket (AA) before it is connected to the ground conductor of the supply circuit.

□ Cover the wires with wire connectors (EE). Tape the wire connectors (EE) and wires together, and carefully position all wires inside

the outlet box.

Making the electrical connections