Instructions / Assembly

Option 1 Option 2 Option 3
Option 7Option 4 Option 5 Option 6
□ Guide the xture wire with the bare copper ground wire through the tubes (B,C,D) and the canopy assembly (A).
□ Tighten the canopy assembly (A) and the tubes (B,C,D) together onto the xture body (G) until secured respectively as shown in the
diagram.
□ There are seven different height options for the user to chose from:
Installation
AA
AA
A
B
C
C
C
D
C
C
C
C
C
C
C
C
C
C
B
B
C
C
B
B
G
BB
DD
CC
5
□ Fasten the support screws (long) (CC) into the mounting
bracket (AA), and secure it using the hex nuts (DD).
□ Fasten the mounting bracket (AA) onto the outlet box using
two outlet box screws (short) (BB).
1
Preparing the mounting bracket
3
Assembling the tubes and canopy assembly to the xture body
NOTE: The support screws (long) (CC) should extend
long enough to protrude through the canopy assembly
(A) when it is mounted. (Adjust as needed.)
2
Installing the mounting bracket