Specifications

CHAPTER 3
With the smart configuration program, the InterPhone is ready to use in three
minutes!
Configuring Your InterPhone
To use InterPhone as an Ethernet phone, you need to subscribe an Internet access line from your
local ISP. It could be xDSL, Cable Modem or Leased Lines. You should have the following
information:
1) IP Address: _ _ _ . _ _ _ . _ _ _ . _ _ _
2) Gateway IP Address: _ _ _ . _ _ _ . _ _ _ . _ _ _
3) Subnet Mask: _ _ _ . _ _ _ . _ _ _ . _ _ _
Before You Start
3-1Configuring Your InterPhone