Datasheet

DERAY®-SET 5000
Flame retardant
Technical data heat shrink
Technical data butt connectors (tube)
Test Method
Typical Performance
coloured
Typical Performance
clear
Tensile Strength IEC 60684-2 15 MPa 19MPa
Elongation IEC 60684-2 450% 530%
Longitudinal Change ASTM-D 2671 6% max. 6% max.
Secant Modulus ASTM-D 882 175 MPa 175 MPa
Specific Gravitiy ASTM-D 792, A-I 1,25 g/cm³ max. 1,00 g/cm³ max.
UL 224 300% 490%
UL 224 12 Mpa 18 MPa
IEC 811-1-2 400% 500%
IEC 811-1-2 13 MPa 18 MPa
Low Temperature Flexibility
ASTM-D 2671 Meth. C
does not break at -55°C does not break at -55°C
Flammability
UL 224 (coloured)
FMVSS 302 (clear) self-extinguishing passed
Test Method
Typical Performance
coloured
Typical Performance
clear
Dielectric Strength VDE 0303 Part 2 24 kV/mm 26 kV/mm
Volume Resistivity VDE 0303 Part 3 10
15
Ω x cm 10
15
Ω x cm
Test Method
Typical Performance
coloured
Typical Performance
clear
Corrosive Action
ASTM-D 2671 Meth. A
non-corrosive non-corrosive
Copper Compabilty
ASTM-D 2671 Meth. B
non-corrosive non-corrosive
Chemicals Resistence good good
Water Absorption VDE 0472 0,15% 0,30%
Property
(168 hrs at 158°C)
Aging (168 hrs at 158°C)
(4 hrs at 200°C)
Shock (4 hrs at 200°C)
Electrical Properties
Chemical Properties
Current Values Test Methods
Material
Surface
Specific Gravity
Shrink Ratio
Longitudinal Shrinkage
Shore Hardness
Ethylen-Copolymer
modified
lead, cadmium, halogenfree
smooth
0,95 g/cm³ max.
>2:1
10 % max.
Shore D ~ 55
ASTM-D 792, A-I
ASTM-D 2671
Mechanical
Properties
Tensile Strength
Elongation
27 Mpa
450%
IEC 60684-2
IEC 60684-2
Thermal
Properties
Thermal Aging
Thermal Shock
Cold Bend Test
Combustion Behaviour
Shrink Temperature
Storage Temperature
Continuous Operating Temp.
(168 h at 165° C)
(4 h at 250° C)
4 h at -55° C
pass
min. 100° C
+ 50° C max.
-55° C to + 125° C
no dripping, flowing or
breaking
no dripping, flowing oder
breaking
no cracking or splitting*
MVSS 302
IEC 216
Chemical
Properties
Corrosive Action
Compability with Copper
Resistance against
Chemicals :
Alteration in weight:
Dielectric Strength:
Tensile Strength:
Elongation:
Water Absorbtion
non-corrosive
non-corrosive
24 h at 23° C
max. 10% ***
min. 25 kV / mm
min. 20 Mpa
min. 350 %
max. 0,5 %
ASTM-D 2671 Meth. A
ASTM-D 2671 Meth. B
ASTM-D 2671 **
VDE 0472
Electrical
Properties
Dielectric Strength
30 kV / mm VDE 0303 Part 2
Technical Data
* Outer Jacket
** Fluids: Trichloroethylene, Isopropyl alcohol, Petrol, Battery acid, Diesel fuel, Engine oil, Antifreeze fluid, Brake fluid, 5 % NaCl-
solution