Datasheet
Seite 1 von 1
Productdatasheet
Colour
Shortdescription
Technical Data
Current Values
Test Methods
Material PE, modified, RoHs & Reach konform
Surface smooth
Specific gravity
1,3 g/cm
3
max.
Longitudinal shrinkage +-5% max. ASTM-D 792, A-I
Shrink ratio 2:1 ASTM-D 2671
Tensile strength 17 MPa IEC 60684-2
Elongation 510% IEC 60684-2
Secant modulus 175 MPa max. ASTM-D 882
Thermal ageing (168 h at 158 °C) UL 224
Tensile strength 13 MPa
Elongation 305%
Thermal shock (4 h at 200 °C) IEC 811-1-2
Tensile strength 14 MPa
Elongation 470%
Cold bend test does not break at -55°C ASTM-D 2671
Meth. C
Combustion behaviour selfextinguishing UL 224
Shrink temperature +100°C to +200°C
Storage temperature +50°C max.
Continous operating temperature -55°C to +135°C IEC 216
Corrosive action non-corrosive ASTM-D 2671
Meth. A
Compatibility with copper non-corrosive ASTM-D 2671
Meth. B
Resistance against chemicals good
Water absorption 0,20% VDE 0473
Dielectric strength 24 kV/mm DIN EN 60243-1
(1999)
Spec. volume resistivity
10
16
Ω x cm
DIN IEC 60167
(1993)
very good
good
good
All Information contained in this preliminary datasheet is believed to be reliable. We advise however that customers should separately evaluate the suitability of our products for their particular
application. DSG-Canusa GmbH gives no guarantees in respect of the accuracy or sufficiency of the information presented and disclaim any liability regarding its use. Our responsibilities are
only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect, or consequential damage or damages arising from
the sale, resale, transfer, use or misuse of the product. Subject to modification
Thermal Properties
Chemical Properties
Electrical Properties
Printability
Hot stamp printing
Ink jet printing
Thermotransfer printing
DERAY
®
- I
coloured
Heat shrinkable sleeve, radially crosslinked, 05-2015
Material
Mechanical Properties
DSG-Canusa GmbH
Boschstr. 17
D- 53359 Rheinbach
Phone: +49 2226 9047-355
Fax: +49 2226 9047-340
www.dsg-canusa.com