Data Sheet

Seite 1 von 1
Productdatasheet
Short description
Technical Data
Current Values
Test Methods
Braid Polyester PET monofilament,
cadmium, halogen and
formaldehyde free
Colour black
Specific gravity
1,38 g/cm
3
max.
ASTM-D 792, A-I
Yarn diameter 0,25 mm
Warp yarn 1100 Dtex
Abrasion resistance
> 144.000 According to D44 1959
Tensile stress 650 N/mm²
Elongation 20 %
Tensile warp 5000 N/50 mm BS EN 13934
Tensile weft 1600 N/50 mm BS EN 13934
Cold bend test does not break at -50°C ASTM-D 2671 Meth. C
Combustion behaviour < 100 mm/min FMVSS 302
Shrinkage 2 - 4% Water 100°C
Shrinkage 24 - 28 % Air 200°C
Melting temperature + 250°C IEC 216
Operating temperature -50°C to +150°C
Resistance against good*
Water absorbtion 0,1 % max. VDE 0473
UV resistance good
CanuRound PET
Wrap-around Protection Sleeve Issued 04-2016
Material Properties
Mechanical
Properties
Thermal Properties
Chemical
Properties
* Alcalescent or weakly acidic materials, oils, fats, aliphatic and aromatic hydrocarbons.
Unstable: Strong acidic or alkaline materials, longer impact of hot water
All Information contained in this preliminary datasheet is believed to be reliable. We advise however that customers should separately evaluate the suitability of our products
for their particular application. DSG-Canusa GmbH gives no guarantees in respect of the accuracy or sufficiency of the information presented and disclaim any liability
regarding its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual,
indirect, or consequential damage or damages arising from the sale, resale, transfer, use or misuse of the product. Subject to modification.
DSG-Canusa GmbH
Boschstrasse 17
D- 53359 Rheinbach
Phone: [phone]
Fax: [phone]
www.dsg-canusa.com