Instruction manual

Home Automation allows you to control lights, appliances, and other devices through the security system.

The system can be set to operate devices automatically: lights can be turned on and off at certain times of the day,

air conditioning can be controlled, and so on, according to programmed 'schedules'. 'Scheduling' is designed to

give the premises an 'occupied' appearance while you are away.

Your installer will tell you whether or not Home Automation functions have been set up on your system, and

which devices the system can control.

Accessing Home Automation Functions

1. Access the security system using the steps described in the 'Accessing Your Security System' and 'Accessing

Partitions' sections of this manual.

2. Press [*]. When the system announces

'For Home Automation press [5]'

press [5]. The system may require you to enter your access code at this time. If prompted, enter your [Access

Code].

The system will then announce the Home Automation Menu:

Home Automation Menu Item Function

'For Individual Item Control press [1]' Allows you to control individual items

'For Mode Control Press [2]' Allows you to turn Schedules ON and OFF

'For Global Item Control Press [3]' Allows you to turn Global Items ON and OFF

'To Exit Press [#]' Returns to the system status messages.

Individual Item Control

This function allows you to control each item individually.

1. From the Home Automation menu, press [1]. The system announces the Individual Item Control Menu:

Individual Item Control Menu Function

'Item {name/number}' Indicates the number selected

'To turn on press [1]' Turns ON the item

'To turn off press [2]' Turns OFF the item

'For the next item press [5]' Advances to the next item

'For the previous item press [6]' Skips back to the previous item

'To select item number press [7]' Lets you select another item by keying in the 2-digit

number of the device (01-32)

'To exit press [#]' Returns to the Home Automation menu

If dimming is enabled for the selected item, the system will also announce

Individual Item Control Menu Function

'To Increase, Press [3]' Increases the brightness

'To Decrease, Press [4]' Decreases the brightness

Home Automation

S e c t i o n 1 1