Instruction manual

Volume and Speech Rate

The volume and speech rate controls allow you to adjust the volume of the messages announced by the system,

and to select the rate at which the messages are read.

Volume Control

1. Access the security system using the steps described in the 'Accessing Your Security System' section of this

manual.

2. Press [*]. When the system announces

'For Special Functions press [6]'

press [6].

3. The system will announce

'Enter your Access Code'

Enter your [Access Code].

4. When the system announces

'For Volume Control press [2]'

press [2] . The system will then announce the current volume setting as one of the following:

'Volume is low. To change the volume, press [1].'

'Volume is medium. To change the volume, press [1].'

'Volume is high. To change the volume, press [1].'

5. Press the [1] key to select a volume level. As the [1] key is pressed, the system will indicate which volume level

is selected.

6. When the desired volume is selected, press [#].

Speech Rate Control

1. Access the security system using the steps described in the 'Accessing Your Security System' section of this

manual.

2. Press [*]. When the system announces

'For Special Functions press [6]'

press [6].

3. The system will announce

'Enter your Access Code'

Enter your [Access Code].

4. When the system announces

'For Speech Rate press [3]'

press [3].

5. The system announces the current speech rate as one of the following:

'Speech Rate is Slow. To change the speech rate press [1].'

'Speech Rate is Fast. To change the speech rate press [1].'

Press [1] to select a speech rate. As [1] is pressed, the system will indicate which speech rate is selected.

6. When the desired speech rate is selected, press [#].