Instruction manual

Setting the Time and Date

1. Access the security system using the steps described in the 'Accessing Your Security System' section of this

manual.

2. Press [*]. When the system announces

'For Special Functions press [6]'

press [6]. The system will announce

'Enter your Access Code'

3. Enter your [Access Code].

4. When the system announces

'For Time and Date press [1]'

press [1]. The system will then announce the current time and date, and then

'To change the Time, press [1].

To change the Date, press [2].

To change the year, press [3].

To exit, press [#].'

5. To change the time, press [1]. To change the date, press [2]. To change the year, press [3].

6. Enter the new time, date or year, depending on the selection you made.

imeime

ime: Enter the time in the 24-hour clock format. Enter 00 to 23 for the hour, and 00 to 59 for the minute.

DateDate

Date: Enter 01 to 12 for the month, and 01 to 31 for the day.

earear

ear: Enter 00 to 99 for the year.

7. The system will announce the new time and date. If it is now correct, press [#]. If not, repeat steps 5 & 6 until

it is correct.