Instruction manual

Bypassing Zones

You may bypass zones when access is required to part of the protected area when the system is armed.

Bypassed

zones will not cause an alarm.

You can only bypass zones when the system is disarmed.

Zone Bypass Menu

To bypass zones, or clear bypassed zones:

1. Access the security system using the steps described in the 'Accessing Your Security System' section of this

manual.

2. Select a partition as described in the 'Accessing Partitions' section of this manual.

3. When the system announces

'To turn {Partition X} on enter your Access Code. For more options press [✱]'

press [*]. The system will announce the list of system options.

4. When the system announces

'For Zone Bypassing Press [1]'

press [1].

5. If your system requires that you enter an Access Code to bypass zones, the system will announce

'Enter Your Access Code'

Enter your [Access Code].

The system will announce the Zone Bypass menu:

'There are no zones bypassed.

To bypass individual zones Press [3].

To clear all bypassed zones press [4].

To recall the last set of bypassed zones press [5].

To exit press [#]'.

Go to step 6 to bypass zones, step 7 to clear bypassed zones, or step 8 to recall the last group of bypassed zones.

6.6.

6. To select a zone to bypass, press [3].

The system will announce

'{Zone X} is not bypassed.

To bypass press [✱].

For the next zone press [1].

For the previous zone press [2].

To exit press [#].'

Follow the announced instructions to bypass the correct zone(s). To return to the main Zone Bypass menu,

press [#].

7. To clear all bypassed zones, press [4]. The system will announce

'All bypassed zones have been cleared'

and then return to the Zone Bypass menu.

8. To have the system recall the last set of bypassed zones and bypass them again, press [5].

This feature will save

you time if you bypass the same group of zones regularly. The system will announce

'The last set of bypassed zones have been recalled'

The last set of bypassed zones are now bypassed again. The system then returns to the Zone Bypass menu.

NOTE: The system automatically clears bypassed zones each time the system is disarmed. For security reasons,

your installer may program your system to prevent certain zones from being bypassed.

S e c t i o n 8