Instruction manual

6
Disarming The System
IMPORTANT
If you return to the premises and find that an alarm has occurred while you were away, it is possible
that an intruder may still be on the premises. Do not enter the premises. Go to the nearest telephone
and contact the authorities.
Disarming the System
To disarm your security system:
1. Access the security system using the steps described in the 'Accessing Your Security System' section of this
manual.
2. Select a partition to disarm as described in the 'Accessing Partitions' section of this manual.
If the selected partition is armed, the system will announce
'{Partition X} is on. To turn off, enter your Access Code'
3. Enter your [Access Code]. The system will announce
'Turning {Partition X} off'
If there were no alarms while the system was armed, the system will announce
'No alarm memory'
When the system is disarmed, the Escort4580 may announce additional messages to advise you of the status of
the system, or to allow you to select other partitions.
S e c t i o n 6