Installation manual

6
The SKYROUTE Module
Features
· Compatible Control Panels
- DSC PC5010 software version v1.XX; v2.02
- DSC PC1555 software version v2.XX
- DSC PC580 software version v2.XX
- DSC PC5015 software version v1.XX; v2.2X
· Simple four wire Keybus connection
· Provides full event reporting through Keybus connection
· Module transmits event conditions in less than one second
· Module mounts into existing control panel cabinet
· Powered from the control panel, eliminating the need for an additional
transformer and battery
· Full status from built-in LEDs
- Built-in signal strength indicator and Transceiver status
· Fully programmable via control panel keypad
Antenna
· 3 – 5 dB gain, TNC connector
· Extension Kits available:
- LAE – 3 3 Foot Antenna Kit for Skyroute Transceiver
- LAE – 15 15 Foot Antenna Kit for Skyroute Transceiver
- LAE – 25 25 Foot Antenna Kit for Skyroute Transceiver
RF Power Output
· 3.0 Watts maximum
Power Requirements
· 12 VDC @30mA, from Panel Keybus,
· 12 VDC, from Bell Circuit
- Standby 90mA
- Receiving 135mA
- Transmitting 1.3A
Dimension
· 3.5” x 4.6” x 1.8” (85 mm x 115 mm x 45 mm)
Weight
· 0.5 lbs. (0.2kg)