Installation manual

I N S T A L L A T I O N

If both modules do not show on the keypad, one of the following conditions may be

present:

• the keypad is not connected properly to the Keybus

• there is a problem with the Keybus wiring run

• the keypad does not have enough power

1.6 Downloading

This product has an integrated PC5132-433 v4.1 receiver. When downloading to this

keypad, please select the PC5132-433 v4.1 file. DLS-3 v1.3 and greater must be used

in order to have the capability of downloading to this keypad.