Installation guide

ManualsBrandsDSC ManualsHome building and DecorPC1404 v1.1

PC1404

Zone Follower PGM requires 2 programming sections for attributes: the normal PGM attribute Sections [501-514] and Sections [551-

564] for zone assignment.

[551]-[564] PGM Zone Assignment

27 Police Code



28 For Future Use

29 Zone Follower



30 Status Alarm Memory



Notes:

A change of default setting will NOT affect the output.

A change of default setting will affect the output.

Attribute:

123 4 56 7 8

OFF

Service Req.

Event

AC Fail TLM Fault FTC Enabled Device Fault Device

Tamper

Device Low

Battery

Loss of

Clock

Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled

09 System Trouble

   

Attribute:

123 4 56 7 8

OFF

Burglary

Event

Fire

Event

Panic Event Medical

Event

Supervisory

Event

Priority

Event

Duress Event Output

Follows

Timer

Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled

10 System Event

  

Note:

If a System Event PGM is programmed to follow the Command Output Timer, attribute 8 must be enabled.

Location PGM 29 Zone Follower

Option On Option Off

Option 1 For Future Use

Option 2 For Future Use

Option 3 True Output Inverted

Option 4 For Future Use

Option 5 For Future Use

Option 6 For Future Use

Option 7 For Future Use

Option 8 AND Logic Or Logic

Section Number Output Number Zone Follower Zone

Main Board 1 2 3 4 5 6 7 8

[551] PGM 1

[552] PGM 2

PC5208

[553] PGM 3

[554] PGM 4

[555] PGM 5

[556] PGM 6

[557] PGM 7

[558] PGM 8

[559] PGM 9

[560] PGM 10

12 3 4 5 6 78

PGM

Option

 =ON

OFF

Not Used

–

Not Used

–

True Output

Inverted

Follows Timer

ON/OFF

Code Req.

No Code

Not Used