Installation manual

4. For each of the 4 function buttons, enter the 2-digit number of the

function you want to select. See the programming worksheets for a list of

function key options.

5. Record your programming choices in the worksheets in the back of the

manual.

6. To exit press [#].

3.4 Identified Wireless Keys

Reporting by the system of openings/closings by individual wireless keys and

command output [✱][7] activation by wireless key buttons may be supported on

certain control panels. To do this, the system will reserve access codes 17 – 32

for wireless keys 01-16 respectively. You must program one access code for

each wireless key (using [✱][5] access code programming) for this feature to

work correctly.

NOTE: Program these access codes on the system

after

you have connected

the PC5132-RS to the Keybus (see section 2.4).

Refer to your system Installation Manual for information on access code

programming.

Opening/Closing By Wireless Key Reporting

NOTE: The Identified Wireless Key Opening/Closing option is only available

with PC5010, PC1555 and PC580 v2.1 and higher.

To enable the reporting of

openings

by identified wireless keys:

· Make sure the control panel is v2.1 or higher

· Program a valid access code for each key

· Program an opening reporting code for each key’s access code

· Disable the Unidentified Wireless Key Disarming option in section [017]:

[1]

To enable the reporting of

closings

by identified wireless keys:

· Make sure the control panel is v2.1 or higher

· Program a valid access code for each key

· Program a closing reporting code for each key’s access code

· Disable the Quick Exit option in section [015]: [4]

Command Output Activation

NOTE: The Identified Wireless Key Command Output Activation feature is only

available with the PC5010, PC1555 and PC580 v2.0 and higher.

To enable command output activation by wireless keys, ensure that:

· Make sure the control panel is v2.0 or higher

· Program a valid access code for each key

· Enable the PGM output attribute Requires Access Code for each PGM

output programmed as [✱][7][1-4] in sections [141] to [154].

W I R E L E S S D E V I C E S