Specifications

SYSTEMVINTRODUCTION
2
1.2 Additional Devices
Keypads
A maximum of eight keypads can be connected to the control
panel and can be any combination of the following listed:
• PC1555RKZ 8 zone LED keypad with function keys (number
keys 1-5) and zone input
• PC5508Z 8 zone LED keypad with function keys and zone
input
• LCD5500Z LCD keypad with function keys and zone input
PC5132 Wireless Receiver
The PC5132 Wireless Receiver can be used to connect up to 8
wireless devices to the system. All devices are spread spectrum,
900 MHz, fully supervised devices which use standard ‘AAA’ or
‘AA’ alkaline batteries
.
Seven additional devices are available. They are as follows:
WLS904 Wireless Motion Detector
The wireless motion detector can be used in conjunction with
the PC5132 wireless receiver to include wireless space
protection. The unit comes with four ‘AAA’ batteries
.
WLS905 Wireless Universal Transmitter
The wireless universal transmitter can be used in conjunction
with the PC5132 Wireless Receiver module to add wireless door
or window contacts. The universal transmitter comes with three
‘AAA’ batteries and has built-in contacts. The unit also provides
terminals for connecting hardwire contacts
.
WLS906 Wireless Smoke Detector
The wireless smoke detector can be used in conjunction with
the PC5132 wireless receiver to include wireless smoke
detection. The unit comes with six ‘AA’ batteries
.
WLS907 Wireless Slimline Universal Transmitter
The wireless slimline universal transmitter can be used with the
PC5132 wireless receiver to add wireless door or window
contacts. The unit is smaller than the WLS905. The unit comes
with three ‘AAA’ batteries and has built-in contacts.
WLS908 Wireless Panic Pendant
The wireless panic pendant can be used in conjunction with the
PC5132 Wireless Receiver to include personal protection.
When used, the unit will indicate a non-medical emergency to
the central station.
The unit comes with 1 mini 12V battery. The disposable unit is
ultrasonically sealed and the battery is not user serviceable.
WLS909 Wireless Key
The wireless key can be used in conjunction with the PC5132
wireless receiver to include a simple and mobile method of arming
and disarming the system. The unit comes with three photo/
electronic 1.5V batteries which can be replaced by the user.
The PC1555 system can have a maximum of 16 wireless keys.
WLS910 Wireless Handheld Keypad
The wireless handheld keypad can be used in conjunction with
the PC5132 Wireless Receiver to include a simple and mobile
method of arming and disarming the system. The unit comes
with three ‘AAA’ batteries.
The PC1555 system can have a maximum of four wireless
handheld keypads.
PC5400 Printer Module
This module will give you the
added advantage for the
commercial customers who like
the idea of a permanent record of
openings and closings, but are
put off by the additional monthly
monitoring charge. In addition, as reports are generated in real-
time, the customer will not have to wait for a monthly report from
the monitoring station.
The PC5400 Printer Module will allow the panel to print out all
events that occur on the system to any serial printer. The
printout will contain the time, date and the event that occurred.
LINKS 1000 Cellular Communicator
The LINKS 1000 Cellular Communicator provides an efficient,
cost-effective method for adding cellular backup to the security
system. The LINKS 1000 Cellular Communicator can be used
three different ways: as the sole communicator for the panel, as
a backup for either or both phone numbers or as a redundant
backup to the land line communicator where the panel will call
both the land line and via the LINKS. The unit comes in its own
cabinet with antenna and requires a separate battery and
transformer (see Section 5.26 “LINKS 1000 Cellular
Communicator”).
Cabinets
Several different cabinets are available for the PC1555 modules.
They are as follows:
PC5003C Cabinet
Main control cabinet for the PC1555 main panel. Dimensions
288mm x 298mm x 78mm / 11.3” x 11.7” x 3” approximately.
PC500 Cabinet with Removable Door
Main control cabinet for the PC1555 main panel. Dimensions
213mm x 235mm x 78mm / 8.4” x 9.25” x 3” approximately.
PC5004C Cabinet
Cabinet to house the PC5400 Printer Module. Dimensions
229mm x 178mm x 65mm / 9” x 7” x 2.6” approximately.
1.3 Out of the Box
Please verify that the following components are included in
your system:
• one PC5003C main control cabinet
• one PC1555 main control circuit board
• one PC1555RKZ keypad with zone input
• one Installation Manual with programming worksheets
• one Instruction Manual for the end user
• one hardware pack consisting of:
- one mylar cabinet label
- four plastic circuit board standoffs
- fourteen 5600Ω (5.6K) resistors
- one 2200Ω (2.2K) resistor
- one 1000Ω (1K) resistor
- ground connection assembly
- one cabinet door plug