Installation manual

[685] Notification Zone 25 - 32 Toggle Options

The default for each Notification Zone Toggle is ON.

[686] Notification Zone 33 - 40 Toggle Options

The default for each Notification Zone Toggle is ON.

[687] Notification Zone 41 - 48 Toggle Options

The default for each Notification Zone Toggle is ON.

[688] Notification Zone 49 - 56 Toggle Options

The default for each Notification Zone Toggle is ON.

[689] Notification Zone 57 - 64 Toggle Options

The default for each Notification Zone Toggle is ON.

System Information (Read Only)

NOTE: Sections [987] - [991] are provided for information (Read Only). Values in these Sections cannot

be modified.

[987] Language Version

This Section will display the current Language version of the IT-230.

[990] Boot Loader Version

This Section will display the current Boot Loader version of the IT-230.

[991] Firmware Version

This Section will display the current firmware version of the device. Update worksheets with new version after a

flash update is completed.

System Reset Defaults

[999] Software Default

Default (99)

Software default allows the installer to refresh the unit after changes and also return the IT-230 to default state.

Default Module

. All programming Sections in module reset to factory settings.

NOTE: This will erase all existing programming of the IT-230.

Reset

. The IT-230 is reset. This option is equivalent to power cycling the IT-230.

Table 18: Notification Zone 25 - 32 Toggle