User manual

3
2. Keypad Controls & Indicators
IMPORTANT NOTICE
A security system cannot prevent emergencies. It is only intended to alert you and your central sta-
tion (if applicable) to an emergency situation. Security systems are generally very reliable but they
may not work under all conditions and they are not a substitute for prudent security practices or life
and property insurance. Your security system must be installed and serviced by qualified security pro-
fessionals. These professionals can instruct you on the level of protection that has been provided and
on system operations.
NOTE: When the keypad is in Sleep Mode it is saving battery life e.g., backlighting, LCD message
display will not be turned on until there is a specific reason: a key is pressed, entry delay is started.
In this mode the keypad is still functioning and nothing will be visible; however if desired, your
installer can enable the product to show the armed status while in Sleep Mode.
3. Language Selection
Your system can display messages in different languages.
1. Press and hold both [<][>] buttons simultaneously for 2 seconds.
2. Using the [<][>] buttons, scroll through the available languages.
3. Press [
] to select your desired language.
4. Arming and Disarming the System
4.1 Stay Arming
Stay arming will bypass the interior protection (i.e., motion sensors) and arm the perimeter of the
system (i.e., doors and windows). Close all sensors (i.e., stop motion and close doors). The Ready
( ) indicator will illuminate.
Press and hold the Stay button until it beeps (approx. 2 seconds). Enter your access code, do
not leave the premises. During the setting state (Exit Delay active), the Armed ( ) and Ready ( )
indicators will illuminate.
When the exit delay is completed, the alarm system is armed/set and this is indicated on the keypad
as follows: the Ready ( ) indicator will turn off, the Armed ( ) indicator will remain on.
The Armed ( ) indicator and a bypass message will be displayed. The system will automatically
ignore bypassed zones (i.e., motion sensors).
NOTE: Your installer can program a function key on the keypad to allow you to arm the system in
Stay mode instantly. This allows you to activate Stay Arming by holding down the function key for
2 seconds. The system arms immediately with no beeps sounding and no exit delay. This feature
must not be used in CP-01 installations.
NOTE: For SIA CP-01 listed panels, the Stay Arming Exit Delay will be twice as long as the Away
Arming Exit Delay.
NOTE: If your system is installed in accordance with SIA CP-01 Standard for False Alarm
Reduction, then the security system will arm in the Stay Armed mode if the exit delay time expires
and no exit has been made.

LED Indicators
Ready
Armed
Trouble
Power
Function Keys:
Away
Arm
Stay
Arm
Chime
Bypass Zones
Quick Exit
X
O
Previous Screen
Select Option
Scroll Keys
Fire
Auxiliary
Panic
2x16 LCD
<>indicates user can
scroll through options
Dual Action Keys:
System is
Ready to Arm <>
2
5
8
0
3
6
9
#
1
4
7
*