User's Manual

8
PC5508Z LED Keypad
Memory Light / Message
Upon disarming, if an alarm has occurred while the
system was armed, the Memory light will turn ON (see
“Disarming the System” on page 6).
Bypass Light / Message
If the Bypass light is ON, one or more zones are
bypassed (see “Zone Bypassing” on page 11).
Fire Light / Message
If the Fire light is ON, a fire alarm has occurred (see
“Fire Alarm Operation” on page 14).
Program Light / Message
The Program light will flash when you are
programming access codes, or performing other
programming functions. If someone is programming
at another keypad, the Program light will turn ON to
indicate that the system is busy.
The PC5516Z and PC5532Z Keypads
are available for applications with more
than 8 zones. The functions explained in
this manual are the same for all three LED
keypad types.
PC1555RKZ LED Keypad
System Light (PC1555RKZOnly):
If the System light is ON, one or more of these conditions
could be present on the system:
System Busy
System Troubles (see 'Viewing Trouble Conditions' on page 11).
Alarm Memory (see 'Disarming the System' on page 6).
Zone Bypassing (see 'Zone Bypassing' on page 11).
Programming The System light will flash when you are
programming access codes, or performing other
programming functions. If someone is programming at
another keypad, the System light will turn ON to indicate that
the system is busy.
NOTE: If you have a PC1555RKZ keypad, the System
light acts as a Trouble, Memory, Programming and
Bypass indicator. Unlike the other keypads, these
conditions will only be represented by the System light.
Please keep this in mind when reading other functions in
this manual.
Emergency Keys (PC1555RKZ)
Press the [F]* key for 2 seconds to send a FIRE
transmission.
Press the [A]* key for 2 seconds to send an AUXILIARY
transmission.
Press the [P]* key for 2 seconds to send a PANIC
transmission.
PC5516Z LED Keypad
PC5532Z LED Keypad