System information

PROGRAMMING THE LINKS2450

Section 3

See section 3.1 for programming instructions when connecting the LINKS2450 to

a PC5015, PC5010, PC5008, PC1580, PC1565 or PC585 panel. See section 3.2 for

programming instructions when connecting the LINKS2450 to a PC4010 or PC4020

v3.0 panel.

3.1 Programming a LINKS2450 Connected to a PC5015, PC5010,

PC5008, PC1580, PC1565 or PC585 Panel

Program the LINKS2450 through Installer’s Programming at a system keypad. For

instructions on using Installer’s Programming sections, please refer to Section 4

“How to Program” in your control panel Installation Manual.

1. Go to Installer’s Programming by entering [*][8][Installer’s code].

2. For PC5015, PC5010, PC5008, PC1565 and PC585:

Go to the LINKS2450

programming section by entering [803]. Program the following sections only

(see section 4 for a description of each section). Record your programming

choices in the worksheets at the end of this manual.

[01] Module Configuration

Option 1

: Communications Enabled / Disabled

Option 2

: Serial Connection / Keybus Connection

[10] LINKS2450 Account Code

[20] Maintenance Alarms and Restoral Reporting Codes

[30] Call Direction Options

[40] Test Transmission (Heartbeat) Timer

[83] Miscellaneous Alarm Reporting Codes (PC1565, PC5008 v2.0

panels only)

3. For PC1580:

Go to the LINKS2450 programming section by entering [86].

Program the following sections only. See section 4 for a description of each

section. Record your programming choices in the worksheets at the end of

this manual.