System information

4
DIAGRAM 2-1
Hook-up For PC5010, PC5015, PC5008, PC1565,
PC1580, PC585 Panels
NOTE: Programming section [01], option 2 must be OFF for LINKS2450 to work
with these panels.
CAUTION: Due to the sensitivity of the RF circuitry, avoid any contact with the coils
and potentiometers on the LINKS2450 circuit board.
*If power supply supervision is required for the LINKS2450 VTX terminals, use the
PC5204. If no supervision is needed, you can use the PS1520 or the control panel
Bell+/Aux- terminals.