Brochure

Touch Panel Control

Network communications

IP-2000XTP-2000X

A Cat-5 to DB-9 adapter that passes serial data as

ASCII control codes between Limitimer and popular

touch panel central conrollers. Touch panel can

access all timer functions including setting times,

starting and stopping clock, beep and blink.

A serial-to-Ethernet adapter that can be configured as

either a server or cllient. Allows Limitimer to drive

remote signal lights or a remote slave timer over the

Internet or within a local area network (LAN). The

adapter’s IP address can be configured via USB

connection to a PC application to enable

use between different networks.

D’San Corporation

142 Mineola Ave, Roslyn Heights, NY 11577

Tel: 516 625-5608

Fax: 516 625-0878

www.dsan.com

info@dsan.com

One to many

One to one

PRO-2000RF

Select this option only if no other Limitimers or DSan cue

lights are being used in proximity. The receiver is locally

powered and may drive up to 4 signal lights. Multiple

receivers may be used to control signal lights in different

locations within a radius of about 200-feet from one timer.

Transmitter operates on 433MHz.

PRO-2000BT

Select this option when using DSan cue lights or other

wireless Limitimer systems in proximity. The transmitter and

receiver will lock onto one another and provide secure and

interference-free communication via Bluetooth protocol. The

receiver is locally powered and may drive up to 4 signal

lights. Any number of transmitter-receiver pairs can be used

in proximity.

A second (slave) timer may be connected to the Bluetooth

receiver. Both timers may start/stop clock and set times.

Wireless connections to the remote signal lights

D'San offers two wireless technologies for connecting Limitimer signal lights to a timer: One is based on a

same range (200-300 feet). And both are configured so that the receiver unit can be optimally placed and

draw local AC power. Multiple signal lights can connect via Cat5 cable to the receiver.