Operation Manual

25
Remedying errors/disturbances
Problem Possible Cause Solution
No steam is being
emitted.
The unit is not activated,
steam trigger has not
been pressed, the unit
is not connected with a
socket or the unit has not
yet warmed up.
Check whether the unit is
connected with a socket
and is activated and
whether the steam trigger
is depressed. The unit
must warm up for approx.
60 seconds before it is
able to emit steam.
The water tank is empty.
Fill up the water tank as
described under “Adding
water”.
Water is emitted instead
of steam.
The water is condensing
in the tube.
Hold the steam trigger
down until steam is
emitted. If applicable,
place a cloth under the
adapter as water may leak
out.
Steam is emitted when
adding more water.
The unit is still too hot.
Allow the device to cool
off completely before you
add more water.