Operation Manual

15
Assembly
1. Carefully push the handle into the main body of the
unit (Fig.).
2. Secure the handle in place with the included pin (3);
see the expanded view “Product Contents & Product
Overview”.
3. Insert the main body (4) into the tube carrier on the
sweeper (8, Fig.). Now push the handheld vacuum
cleaner (7) carefully into the intake air compartment
on the main body until it audibly locks into place.
4. Place the battery charger in the vicinity of a main
socket (at an appropriate distance from heat sources
or damp areas). Insert the adapter cord in the battery
charger (Fig.), the adapter in the socket, and connect
the charger.
Charging
5. Hang the product on the charger (Fig., Note: Always
ensure that the unit has been deactivated). The
control lights will illuminate once the unit comes into
contact with the charger. It will take 8-10 hours
until the rechargeable battery have completely
 chargedforrstuse.Iftheunitiscompletelyempty,
it will take approx. 12-16 hours until the rechargeable
battery attains its maximum power again. In order
to ensure that the unit is always ready to use, you
should place it on the charger when not in use. The
adapter may warm up somewhat during the charging
process - this is normal.
Control lights
Battery charger