Operation Manual

13
Turn the device off, pull the plug out of the socket and allow it to
completely cool off....
...when you are not using the device
...before a storm
...before filling it with water or before cleaning the unit
...before changing the adapters
...or before putting the unit away.
When you remove the power plug from the socket, never pull on the
cable, but on the plug.
Only have a damaged connecting cable repaired by the manufacturer,
customer service or a qualified professional.
Never leave the appliance unattended during use! Turn off the device and
pull the plug out of the socket before leaving the room.
Do not open the water tank when the steam cleaner is on! Never use the
unit with an open water tank!
Never steam other electronic devices!
Never store the unit outdoors!
Fire hazard
Lay the cable such that it is not crushed or creased and such that it does
not come into contact with hot surfaces.
Keep the device and the cable away from heat sources e.g. radiators and
the like.
Attention to material damages
Never transport or move the unit by pulling the cord or carrying it by the
cord.
Do not use any corrosive or abrasive cleaning agents to clean the
appliance. These can damage the surface of the appliance. As needed, clean
the appliance with a soft, dry towel.
When trying out the device for the first time, do so in an inconspicuous
area. If you are uncertain as to whether the surface could be damaged by
the steam, please consult a professional.
Ensure that the cord is never crushed or kinked or that it comes into
contact with hot areas.
Never fill up the unit with random additives such as cleaning agent,
decalcifier (e.g. vinegar), alcohol or aromatic chemicals!
Never use the unit with an empty water tank!