User Manual

Reverb
The Reverb eect is used to add a dimension to your sounds. Additionally, when sound is processed
by trance-gate kind of eects it can lose its depth. In such cases the Reverb is useful to restore the
ambient space.
With the Size control you can adjust the size of the simulated virtual room. Use the Decay to define
the feedback amount for the reverb delays. The Mix control adjusts the balance between Wet and
Dry signal. The Bass and Treble knobs control the boost amount performed by the low pass and
high pass filter inserted into the feedback path. These filters are used to simulate the dampening of
high and low frequencies in natural acoustic spaces. Use the IN button to determine whether the
input signal should be sent to the reverb’s input. Can be useful to bypass the eect while preserving
decaying space at the output.
Master output
The Vol sliders and Pan text fields control the level and the stereo position of the output sound
respectively. The Mix knob adjusts the balance between Wet and Dry signal in the mix. In order to
prevent output clipping the Master output provides a clipper. Turn o the Clipper if you don’t need
it. Use the Master switch to turn o/on audio processing in Tantra. When Tantra is bypassed the
unprocessed sound is heard. Routing control has been explained in the The Layer Eects Section.
25