User Manual
In Curve mode you have the following controls available:
The Smooth control allows you to control the sharpness of the generated envelope. The more the
control is turned to the right the less «clicky» the sound is. You can adjust overall slope of your shape
with the Tension knob. The Shue knob controls the swing amount applied. The swing eect is
produced by pulling every second step of the curve forward in time.
In Curve mode you can use one of two available edit modes, depending on the state of the Lock
switch:
• In SLIDE mode, if you change the node’s position, then all nodes to the right of the selected
one change their positions as well.
• In LOCK mode you can move the node only within the distance between neighboring nodes.
You can use three available commands to quickly alter the shape of the modulation curve.
• With the Invert button you can flip the shape of your curve
• The two buttons with Left and Right arrow icons allow to shift the curve left and right
respectively
22