User Manual
Flanger
The Flanger is a common classic eect produced by mixing the input signal and some
number of its delayed copies. The Flanger widens your sounds and colorizes them
The eect can operate in Flanger and Phaser mode. Use the Flanger control to switch
between the modes.
Use the Delay control to adjust the delay time between the input signal and its delayed
copies. In the Phaser mode, the Delay controls center frequency.
The Feedback knob allows you to define the amount of output signal that is sent back to
the input. The Width knob defines the width of the produced stereo image.
The Tone knob can be used to colorize the output signal by engaging internal filters in
the feedback loop.
The Speed and Sync controls adjust the speed of an internal LFO that is used to
modulate the delay time, while the Depth knob defines the modulation depth.
17