User Manual

Delay
The Delay is the most commonly used eect for adding dimension into sounds.
Producing rhythmic decaying echoes is another major utility of the module
With the Speed L and R control you can adjust the delay time for the left and
right channel respectively.
The Sync switch defines whether the delay time calibrated in tempo-synced
intervals (ON) or in milliseconds (OFF).
The Ping-Pong switch activates/deactivates special connectors in the internal
circuit in order to achieve a classic ping-pong delay eect.
A part of the output signal is sent back to the input of the Delay eect. The
Feedback knob controls the amount of the output that is sent back. The LP and
BP controls allow to adjust the cuto frequency of the Lowpass filter and the
amount of Bandpass processing applied to the feedback signal respectively.
Bandpass processing is useful for creating more natural echo eects.
Use the IN button to determine whether the input signal should be sent to
the delay’s input. Can be useful to bypass the delay eect while preserving
decaying echoes at the output.
15