Instruction Manual

Return
Go to Exit Screen
OFF
ON
6
7 8
Software2
When the center of rotation is aligned with the absolute center position, rotate
the record player again to check that the eccentricity of the record is gone(or
reduced) and then play the record.
Play the record when the adjustment is
finished.The stabilizer will turn off
automatically.
3. Brightness setting
The brightness can be set in 5 levels. Please set the brightness to your own
preference.
Guide LED ON/OFF
The guide LED that indicates the area being measured can be set to ON or OFF.
This guide LED is only for visualizing the actual area being measured and does
not affect the actual measurement even if it is turned OFF. It is recommended
that the LED be turned off during normal use to reduce battery power
consumption.
Start screen
7. Termination
Press YES to turn off the power.
Pressing and holding the button does not turn off the power.
Conditions for automatic power off
No operation: 45 sec.
Starts rotating on the turntable (when record playback starts): 10 sec.
4. Language Settings
You can choose between Japanese and English. Select the language of your
choice and touch the screen.
5. Version Information
Displays the product name and software version.
Make sure that the software is the latest version.
6. Graph Display Settings
Select the graph display method for the main page and the wave display page.
Trace Line
When ON (right side), the area recognized by the software as the record groove
is displayed in blue-white.
If this tracking line coincides with the white end groove, the measurement is
correct.
Max/Min Line
When ON (right side), the maximum and minimum eccentricity values recognized
by the software are displayed with red lines. The median value is also indicated
by a yellow line. These measurement lines remain after adjustment.
Error detection
Indicates in red when there is a reading error.
If the measurement is correct, it is displayed in green.
3
5
4
6
7
Main screen Setting screen
Automatically moves
to the main screen
Setting
Restart