Dimensions Guide

ManualsBrandsDryPly ManualsPlywood673014

Available Sizes (Sized for 4* x 8*)

Square Edge 3*-11

⁄8( (1.216 m) x 7*-11

⁄8( (2.435 m)

Tongue & Groove 3*-11

⁄2( (1.206 m) x 7*-11

⁄8( (2.435 m)

Building Code Performance Categories, Panel Thickness

• 19/32 CAT, 0.578( (14.68 mm)

• 23/32 CAT, 0.703( (17.85 mm)

Specifications

Length/Width Tolerance +0, –

⁄16( (+0, –1.6 mm)

Straightness Tolerance ±

⁄16( (±1.6 mm)

Squareness Tolerance ±

⁄8( (±3.2 mm)

Primary Species Southern Yellow Pine

Water Repellent Coating Wax emulsion based surface sealer

Testing Agency APA

–The Engineered Wood Association

Classification Exposure 1 – Plywood suitable for uses not permanently exposed to the weather. Panels

classified as Exposure 1 are intended to resist the effects of mositure on structural performance

as may occur due to construction delays, or other conditions of similar severity.

Code Fire Classification Class III or C

Flame Spread Rating 76-200, smoke-developed index <450

Building Code Compliance PS 1-09

Other Information

Forestry Certification DryPly plywood Sturd-I-Floor panels are made from wood

sourced through a system that is third-party certified to

the Sustainable Forestry Initiative

procurement standard.

Green Building Programs See our DryPly plywood Sustainability Fact Sheet available

at www.builditbetter.com for more information on potential

point contributions towards specific green building programs.

NGBS Green Certified DryPly plywood is Home Innovation NGBS Green Certified

for Resource Efficiency and Indoor Environmental Quality.

Please visit Homeinnovation.com/Green for more information.

Product Warranty DryPly plywood is covered by a Lifetime Limited Warranty.

For terms and conditions, please refer to our Lifetime

Limited Warranty available at www.builditbetter.com.

DryPly

plywood Sturd-I-Floor

panels are ideal for residential and light commercial construction, and provide outstanding

performance for sub-floors. They have a water-repellent coating to provide weather protection during the normal exposed

construction cycle*, and add proven performance and durability to new homes, room additions and renovations.

*Approximately four weeks of normal exposed construction cycle.

Specifications

Summary of content (2 pages)

PAGE 1
Specifications DryPly® plywood Sturd-I-Floor® panels are ideal for residential and light commercial construction, and provide outstanding performance for sub-floors. They have a water-repellent coating to provide weather protection during the normal exposed construction cycle*, and add proven performance and durability to new homes, room additions and renovations. Available Sizes (Sized for 4* x 8*) Square Edge 3*-117⁄8( (1.216 m) x 7*-117⁄8( (2.435 m) Tongue & Groove 3*-111⁄2( (1.206 m) x 7*-117⁄8( (2.
PAGE 2
Specifications International Shipping To prevent the introduction and spread of plant pests, ISPM 15: International Standards for Phytosanitary Measures, requires that internationally shipped solid wood pallets be debarked, treated with heat or fumigated with methyl bromide, and marked with a seal of compliance. Pallets made with engineered wood, including DryPly® plywood, are exempt from ISPM 15 regulations.