SDS

Auto-ignition temperature 194 °C (auto-ignition temperature (liquids and gases)) 
Viscosity not determined
Explosive properties none
Oxidizing properties none
SECTION 10: Stability and reactivity
10.1 Reactivity
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
10.2 Chemical stability
See below "Conditions to avoid".
10.3 Possibility of hazardous reactions
No known hazardous reactions.
10.4 Conditions to avoid
There are no specific conditions known which have to be avoided.
10.5 Incompatible materials
Oxidizers
10.6 Hazardous decomposition products
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are
not known. Hazardous combustion products: see section 5.
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Test data are not available for the complete mixture.
Classification procedure
The method for classification of the mixture is based on ingredients of the mixture (additivity formula).
Classification acc. to OSHA "Hazard Communication Standard" (29 CFR 1910.1200)
Acute toxicity
Shall not be classified as acutely toxic.
Acute toxicity estimate (ATE) of components of the mixture
Name of substance CAS No Exposure route ATE
Aluminium oxide 1344-28-1 inhalation: vapor 3
mg
/
l
/4h
Aluminium oxide 1344-28-1 inhalation: dust/mist 0.888
mg
/
l
/4h
1,2-benzisothiazol-3(2H)-one 2634-33-5 oral 670
mg
/
kg
Skin corrosion/irritation
Shall not be classified as corrosive/irritant to skin.
Serious eye damage/eye irritation
Shall not be classified as seriously damaging to the eye or eye irritant.
Safety Data Sheet
acc. to 29 CFR 1910.1200 App D
DRYLOK® E1 Latex 1-Part Epoxy Concrete Floor Paint (Platinum)
Version number: REV 2.1
Replaces version of: 2020-07-16 (REV 1)
Revision: 2021-05-17
United States: en
Page: 7 / 14