Specification

1. For each product specified, two cured samples, representing actual product color and
texture.
1.5 QUALITY ASSURANCE
A. Comply with Section 01 40 00.
B. Qualifications:
1. Manufacturer Qualifications: Company with minimum 15 years of experience in
manufacturing of specified products and systems.
2. Applicator Qualifications: Company with minimum of 5 years’ experience in application
of products as specified in this section on projects of similar size and scope, and employs
installers and supervisors who are trained by and acceptable to product manufacturer.
a. Successful completion of a minimum of 5 projects of similar size and complexity
to specified Work.
C. Field Mock-up:
1. Install at Project site or pre-selected area of building an area for field mock-up, as
directed by Architect.
2. Apply material in strict accordance with manufacturer’s written application instructions.
3. Manufacturer’s representative or designated representative will review technical aspects;
surface preparation, application, and workmanship.
4. Field sample will be standard for judging workmanship on remainder of Project.
5. Maintain field mock-up during construction for workmanship comparison.
6. Do not alter, move, or destroy field mock-up until Work is completed and approved by
Architect.
7. Obtain Architect’s written approval of field mock-up before start of material application,
including approval of aesthetics, color, texture, and appearance.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Comply with Section 01 60 00.
B. Comply with manufacturer’s ordering instructions and lead-time requirements to avoid
construction delays.
C. Deliver materials in manufacturer's original, unopened, undamaged containers with
identification labels intact.
D. Transport and store in unopened containers and keep in clean, dry condition protected from rain,
dew, and humidity.
1.7 PROJECT CONDITIONS
A. Environmental Requirements:
1. Do not apply outdoors in rain or when rain is expected within 48 hours. Do not apply
above 95 degrees F (35 degrees C) or below 50 degrees F (10 degrees C) or when
temperatures are expected to fall below 40 degrees F (4 degrees C) within 24 hours.