Specification

SKU# Selling Unit
98230 Bag of 30
INSTALLATION INSTRUCTIONS
www.kinginnovation.com
(P) 800.633.0232
(F) 636.519.5410
Max. Voltage: 600V max. building wire
(1000V max. signs or luminaries)
Connector Size: .99” x .95”
Wire Type: Copper/Copper (Solid/Stranded)
Wire Range: Min #22/Max #14*
*Not for use with 3 #14 AWG
Temperature Rating: 105°C (221°F)
Silicone Sealant Temperature: -45°F to 400°F
Tube Construction: Polycarbonate UV and Impact Resistant
PRODUCT SPECIFICATIONS
AND MEASUREMENTS
DO NOT REUSE.
MADE IN USA
50100-103 REV E 12/17
Measurements (Inches):
A- .99” B- .95” C- .51” D- .16”
IMPORTANT: Turn off power before
installing or removing connector.
Product to be used in accordance with
local and national codes.
1. Insert conductor into port, fully
seating conductor into port. One
conductor per port only.
2. Using hand tool, press cap fully
into housing. The cap will be flush
or slightly below the edge of the
housing.
3. Wipe excess sealant in and around
conductors and ports. Do not reuse.
To be sold only with installation instructions.
FEATURES AND BENEFITS
• Insulation displacement connector.
• Don’t have to strip wires.
NOTE: When installing solid and stranded conductor,
place stranded in center port.
316 IR+
Manufacturer approved for low voltage (30V) wet, damp
and direct bury applications
Great for Low Voltage Irrigation Connections
U.S. Pat. 9,496,626 and additional Patents
Pending apply. All other trademarks, U.S. and
Foreign Patents apply. All Rights Reserved.
TWO WIRE CONNECTION
THREE WIRE CONNECTION
OR