Specification
1, 2, or 3 #4, #6, #8, #10, #12, or #14 1 #4 w/ 1 or 2 #6, #8, #10, #12, or #14 2 #4 w/ 1 #6, #8, #10, #12, or #14
1 #6 w/ 1 or 2 #8, #10, #12, or #14 2 #6 w/ 1 #8, #10, #12, or #14 1 #8 w/ 1 or 2 #10, #12, or #14
2 #8 w/ 1 #10, #12, or #14 1 #10 w/ 1 or 2 #12 or #14 2 #10 w/ 1 #12 or #14
1 #12 w/ 1 or 2 #14 2 #12 w/ 1 #14
IMPORTANT: Turn off power before
installing or removing connector.
Product to be used in accordance
with local and national codes.
1. Strip wires 9/16” (14.3mm).
2. Align any frayed strands or
conductors.
3. Insert conductor into port of lug.
One conductor per port only.
4. Tighten set screws, securing
conductors in lug.
5. Place lug into
housing with
conductors
in-line with
conductor
openings (See
Figure A).
6. Close housing
verifying it
is securely
latched.
Catalog # Selling Unit
98105 Bag of 3
Max. Voltage: 600V*
Connector Size: 2.04” Tall x 3.0” Wide x 1.17” Deep
Lug Size: .75” Tall x 1.65” Wide x .56” Deep
Wire Type: Copper
Wire Range: #14 - #4
Temperature Rating: -50°C to 90°C (-58°F to 194°F)
Silicone Sealant Temperature: -50°C to 200°C
(-58°F to 392°F)
INSTALLATION INSTRUCTIONS:
PRODUCT SPECIFICATIONS
AND MEASUREMENTS:
www.kinginnovation.com
(P) 800.633.0232
(F) 636.519.5410
MEASUREMENTS (INCHES):
A - 2.04
B - 3.00
C - 1.17
Direct Bury Power Connector
DryConn
®
DB Power Connect
A
B
C
Selected 600V Wire Combinations
Contact factory for a complete list of wire combinations at 800.633.0232.
All of the statements, technical information,
drawings, illustrations, and instructions related
to King Innovation’s products are based on
information understood as reliable and correct
to the best of the company’s knowledge. It is
the responsibility of the independent user to
assure the testing conducted by King Innovation
is suitable for the proposed application. All risks
and liability are assumed by the independent
user. Any assertion associated to the product
which is not outlined in King Innovation’s
current publications, or any dissimilar assertion
contained on individual purchase orders shall
have no force or effect unless explicitly arranged,
in writing, by an authorized officer of King
Innovation. King Innovation’s liability for these
products is set forth in our standard terms and
conditions of sale. King Innovation is a registered
trademark.
*Important Notice: