Specification
Installation Instructions:
IMPORTANT: Turn off power before installing
or removing connector. Product to be used in
accordance with local and national codes.
Do not reuse.
KSC-1 Extra Small
1. Strip wires 9/32”.
2. Slide Heat Shrink tubing over one end of the wire.
3. Align any frayed strands or conductors.
4. Firmly push wire into each port.
5. Crimp connector (two crimps per side).
6. Center heat shrink tubing over crimped connector.
Beginning from the center of the heat shrink tubing
evenly heat until heat shrink is fully compressed
around wire.
KSC-2 Small
1. Strip wires 3/8” (If using (1) #18 or (1) #16 per
side strip wire 3/4” and fold back on
one another).
2. Slide Heat Shrink tubing over one end of the wire.
3. Hold stripped wires together with ends of
insulation even.
4. Align any frayed strands or conductors.
5. Firmly push wire into each port.
6. Crimp connector (two crimps per side).
7. Center heat shrink tubing over crimped connector.
Beginning from the center of the heat shrink tubing
evenly heat until heat shrink is fully compressed
and clear sealing adhesive is visible.
KSC-3 Medium
1. Strip wires 1/2”. (If using 4-5 #18, 3 #16, 2 #14,
1 #16 w/1 #14, 1 #18 w/2 #16, 2 #18 w/1
#14 or 3 #18 w/1 #16 strip wire 1” and fold
back on one another).
2. Slide Heat Shrink tubing over one end of the wire.
3. Hold stripped wires together with ends of
insulation even.
4. Align any frayed strands or conductors.
5. Firmly push wire into each port.
6. Crimp connector (two crimps per side) using King
Krimper™ - Color - Blue (8.0).
7. Center heat shrink tubing over crimped connector.
Beginning from the center of the heat shrink tubing
evenly heat until heat shrink is fully compressed
and clear sealing adhesive is visible.
KSC-4 Large
1. Strip wires 9/16”.
2. Slide Heat Shrink tubing over one end of the wire.
3. Hold stripped wires together with ends of
insulation even.
4. Align any frayed strands or conductors.
5. Firmly push wire into each port.
6. Crimp connector (two crimps per side).
7. Center heat shrink tubing over crimped connector.
Beginning from the center of the heat shrink tubing
evenly heat until heat shrink is fully compressed
and clear sealing adhesive is visible.
KSC Connectors (King Shrink Crimp)
Catalog # Description Selling Unit
72010 KSC-1 (Extra Small) Bag of 20
72020 KSC-2 (Small) Bag of 20
72030 KSC-3 (Medium) Bag of 20
72040 KSC-4 (Large) Bag of 8
Great for use with low voltage lighting
PRODUCT SPECIFICATIONS & MEASUREMENTS
Max. Voltage: 125 Volts
Wire Type: For use with Stranded wire only
Wire Range: KSC-1 Extra Small: Min #22 / Max #16
KSC-2 Small: Min #18 / Max #12
KSC-3 Medium: Min #18 / Max #8
KSC-4 Large: Min #18 / Max #8
CONSTRUCTION
Tubular copper with tin plating
MEASUREMENTS
KSC-1 Crimp Extra Small
A = 0.13” B = 0.63”
KSC-2 Crimp Small
A = 0.21” B = 0.78”
KSC-3 Crimp Medium
A = 0.31” B = 1.13”
KSC-4 Crimp Large
A = 0.38” B = 1.13”
BA
BA
BA
BA