Installation Guide

Installation Instructions:
IMPORTANT: Turn off power before
installing or removing connector. Product
to be used in accordance with local and
national codes.
1. Insert conductors through ports in base of
body.
2. Strip conductors.
3. Align any frayed strands or conductors, twist
stripped conductors together, and insert into
crimp sleeve.
4. Using an indent type crimping tool, crimp
sleeve and trim excess bare wire.
5. Fill plug with 20248 sealant (sold
separately).
6. Push conductors fully into plug.
7. Insert plug into body until it snaps in place.
Do not reuse
Dry-Crimp Connectors
Catalog # Selling Unit
20240 Non-Filled Connectors Bag of 25*
20248 Silicone Sealant 1 Tube
20249 Replacement Crimp Sleeves Bag of 50 (25 small, 25 large)
PRODUCT SPECIFICATIONS
AND MEASUREMENTS
Max. Voltage: 50V
Connector Size: 0.90” (22.9mm) x 1.45” (36.8mm)
Wire Type: Copper
Wire Range: Min #18 / Max #10
MEASUREMENTS
A - 0.90” B - 1.45”
CONSTRUCTION
Housing and Insert - High impact polypropylene
Crimp - Copper
* Contents include 25 Non-filled housings, 25 small and 25
large copper crimp sleeves
Great for use with low voltage lighting and direct bury applications
All U.S. trademarks apply. All Rights Reserved.
Copper Crimps are UL Listed.
Made in USA of US and Foreign parts
50100-85 REV B 04/19
A
B
Works Great With:
46501- Gorilla Wire Stripper/
Crimper/Cutter
GESP-70- ArmorEdge
Wire Stripper