Data Sheet
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 524359_524360_16.05.2022
Series 4 Single Pedal
Series 6 Single Pedal
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do
not just dispose of these materials with your normal household waste,
but make sure that they are collected for recycling. Please follow the
notes and markings on the packaging.
Single pedal
Double column
Powder-coated
Adjustable spring suspension
Double chain
Base plate
2-way beater
Bass drum is not included
Colour: black
Weight: 1.7 kg
Ensure that plastic bags, packaging, etc. are disposed of properly and
are not within reach of babies and young children. Choking hazard!
The plasticiser contained in the rubber feet of this product may
possibly react with the coating of your surface and after some time
cause permanent dark stains. In case of doubt, do not put the rubber
feet directly on the surface and use a suitable underlay if necessary, i.e.
felt-pad oor protectors or similar.
Assembling the bass drum pedal
The beater is screwed into the bracket.
Do not stick the bottom end of the shaft in too far; otherwise, it could
damage the bass drum head.
Setting up the bass drum pedal
After assembling the bass drum, it is possible to set up the bass drum pedal.
The length of the spurs is adjusted such that there is a gap of the width of
one nger between the oor and the lower edge of the hoops; when doing
this, the drum shell should not lean forwards or towards the player. To retain
the settings of the spurs, the bass drum spurs for height adjustment are tted
with memory clips (that remain in position at dismantling too).
Use the drum key to x the screws.
Now you can push the bass drum pedal onto the clamping ring and x it
with the claw. Use some gaa tape to protect the hoop from scratching.
EN