Owner manual

B-3SPECIFICATIONS
B-3.1 Autoread Plus Analyzer (p/n 429576)
Electrical Inputs ±16.5 VDC, ±12.5 VDC,
±20 VDC
(Refer to diagram in Figure
3-13, Section 3)
Display Reflective-type
Liquid crystal
Operating Temp.
(with QBC Tubes) 68 °F to 98 °F
(20 °C to 32 °C)
(with AccuTube) 68 °F to 98 °F
(20 °C to 37 °C).
Non-Operating –4 °F to +140 °F
Storage Temp. (–20 °C to +60 °C)
Humidity 10%to95%
(non-condensing)
Weight 8 lbs. (3.6 kg)
Dimensions W 13.5” x D 9.5” x H 4”
(34 cm × 24 cm × 10 cm)
B-3.2 Power Pack (p/n 424590)
Voltage 90-265 VAC
Frequency 50-60 Hz
Power 170 W
Power Cord 8 ft. (2.4 m)
Grounded cord and plug
DC Output Cord 3 ft. (0.3 m)
8 wire, shielded cord
9-pin male plug
Weight 5.5 lbs. (2.5 kg)
Dimensions W 7” x D 3.75” x H 3.5”
(17.8 cm × 9.5 cm × 8.9 cm)
B-3.3 QBC Capillary Centrifuge (p/n 424740 )
Nominal Speed 12,000 rpm ±80 rpm
Relative Centrifugal 14,387 × g
Force (RCF) (at nominal speed)
Rotor Capacity 20 QBC blood tubes;
numbered tube slots
Timer Electronic
300 seconds spin
15-20 seconds deceleration
Non-Operating –15 °F to +150 °F
Storage Temp. (–26 °C to +66 °C)
Input 90-264 VAC, 47-63 Hz
Output 47 ±3 VDC
3 ADC Maximum, steady
state
*See QBC Capillary Centrifuge Operator’s Manual for
complete data.
B-2