Owner manual

4.10 PRECAUTIONS AND HAZARDS
ELECTRICAL SAFETY
•Power Connections: Plug the cordsets of
the power pack, centrifuge, and printer only
into AC receptacles rated at the voltage and
frequency specified on the data plates.
•Grounding: Never remove the grounding prong
from the cordset plugs of the power pack,
centrifuge, and printer.
•Repairs: Always unplug the power cord before
attempting any repairs or service.
•Defective Cords: If a power cord or plug
is damaged, promptly request replacement
service.
HANDLING PRECAUTIONS
•Biohazards: Blood specimens may contain the
Hepatitis B Virus (HBV), Hepatitis C Virus (HCV),
Human Immunodeficiency Virus (HIV), or other
disease-causing agents. Handle all patient
specimens as potential biohazards capable
of transmitting infection. Wear appropriate
personal protective equipment, including
gloves, when collecting and processing blood.
•QBC Tube/Centrifugation: QBC Blood Tubes
are made of glass. Be careful when handling
and preparing tubes to prevent breakage and
possible injury. Inspect QBC Tubes before
use. DO NOT use cracked or scratched tubes.
Always install the rotor cover tightly before
centrifuging blood tubes to prevent breakage.
•Position Error Message: Always use forceps
to remove tube from instrument. Carefully
follow instructions or message display to
prevent breakage of tube inside instrument.
•Tube Breakage: If a QBC tube breaks, carefully
pick up broken glass with a hemostat or other
device, using puncture-resistant utility gloves.
— If a tube breaks inside the centrifuge, wipe
the head and interior of the cover clean with
a cloth and a 1:10 dilution of chlorine bleach.
Allow to dry. Note: Do not pour water or
bleach solution into the centrifuge itself.
— If a tube breaks inside the analyzer, remove
the waste tray below the loading platform
and discard any broken glass. Clean the
waste tray with a 1:10 dilution of chlorine
bleach; then rinse with water and dry.
4-15