User Manual

4
Supplied Equipment*:
The following items come standard with each Horizon 755V-24 Centrifuge:
1. One (1) six-place horizontal rotor
2. Six (6) 100 mm four-place tube carriers p/n 7786022
3. One (1) Operator's Manual (not shown) p/n 7713023
4. One (1) Tutorial CD (not shown)
Optional:
 • 50mLsingle-placetubecarrier   p/n7713037
 • Carriercap     p/n7713035
1. 2.
* The rotor and rotor accessories are rated for a rotation frequency of 3500 RPM (a force of 2100 xg).
Supplied Equipment*:
The following items come standard with each Horizon 755V-12 Centrifuge:
1. One (1) Horizon centrifuge
2. One (1) twelve-place horizontal rotor p/n 7786024
3. Twelve (12) 100 mm test tube holders p/n 7713031
4. Twelve (12) 125mm test tube holders p/n 7713032
5. Twelve (12) 75 mm test tube p/n 7713033
6. One (1) Operator’s manual
1. 2. 3. 4. 5.
NOTE: Your centrifuge may
have been shipped with additional
or alternate accessories.
* The rotor and rotor accessories are rated for a rotation frequency of
4,000 RPM, (a force of 2450 xg with the 100mm tube holders).
P/N 7711017
NOTE: The programmable run-time
has been preset for
Instructions to change this
setting are located on page 7.
10 Minutes
Model 755 - 24-Place, 755V - 24-Place, 755 - 12-Place, 755 Microplate
Operator’s / Service Manual
Rev. A
Model 755V
Shown
Supplied Equipment*:
The following items come standard with each Horizon 755 Microplate Centrifuge:
1. One (1) Microplate rotor p/n 7786051
2. One (1) Operator’s manual p/n 7711017
P/N 7711017
NOTE: The programmable run-time
has been preset for
Instructions to change this
setting are located on page 7.
10 Minutes
Model 755 - 24-Place, 755V - 24-Place, 755 - 12-Place, 755 Microplate
Operator’s / Service Manual
Rev. A
Model 755V
Shown
1. 2.
* This rotor is rated for a rotation frequency of 1500 RPM.