DRTECH EXT AP User Manual Version 1.
Version 1.3 Revision History Revision History Date Version Category Writer 2020-05-04 1.0 Initial Draft CH.Kim 2020-07-07 1.1 Add User interface manual CH.Kim 2020-07-28 1.2 5. Added antenna specifications DS.KIM 2020-08-10 1.3 6. Statement DS.
Version 1.3 Table of contents Table of contents Revision History ........................................................................................................................................................................... 2 Table of contents ......................................................................................................................................................................... 3 1. Overview......................................................................
Version 1.3 1. Overview 1. Overview EXT_AP is a wireless module capable of high-speed communication for distances up to 300 meters using Wi-Fi technology in open areas. This can be used by choosing between 2.4 GHz and 5 GHz frequency bands. 2x2 MIMO function is supported when using 5GHz frequency band. Bluetooth supports v4.1 specification, EDR. 1.
Version 1.3 2. H/W Features 2. H/W Features 50mm 80mm No Items Value 1 AP i.MX8M Mini 2 DRAM DDR4 512Mbyte x 4 3 NAND Flash eMMC 16GB 5.1 4 Wi-Fi 802.11 n/ac 2x2 5 Bluetooth Bluetooth 4.1 6 Ethernet Gigabit 2 Port 7 USB 2.0 Host I/F 8 External I/F I2C, UART, SPI, GPIO 9 ANT 2 x u.
Version 1.3 3. Specification 3. Specification 3.1 Power and Specification Item Device specification Rated power input DC 5V 2A DC voltage input range +4.5V ~ +5.5V Power consumption 7W (Typical) Rated power input AC 100 ~ 240V, 50/60Hz AC voltage input range AC 100V ~ 240V AC input frequency range 47 ~ 63Hz AC Input Current Max. 0.5A Rated power output DC 5V/2A Line regulation Power Specification Specifications Load regulation Rated power output ± 5% (4.75V ~ 5.
Version 1.3 3. Specification 3.2 Bluetooth Specification Parameter Transmit Power Range Receive Dynamic Range Modulation Channel Frequency Range value +9 dBm ± 2 dB BDR : -93 dBm ± 1.5 dB BDR(GFSK) : 1 Mbps 79 2402 ~ 2480 MHz 3.3 Wi-Fi Specification Parameter Transmit Power Range Receive Dynamic Range Data Rate Channel Frequency Range Bandwidth value 802.11 n: 0 ~ 32 dBm 802.11 n/ac: 0 ~ 32 dBm 802.11 n: -95 dBm ± 1 dB @ 54 Mbps 802.11 n/ac: 0 ~ 90dBm ± 1 dB @ 867 Mbps 802.
Version 1.3 4. Web GUI User manual 4. Web GUI User manual The user can set the access point function of EXT AP using the Web GUI. 1. Launch the web browser (Internet Explorer , Chrome) etc. 2. enter the below address at address bar. (Enter log in IP address) http://192.168.250.99 4.1 User Interface manual 4.1.1 Log in To access the Web UI, user must enter ID and password on the login screen.
Version 1.3 4. Web GUI User manual 4.2 Basic Setting 4.2.1 System information This menu shows the set values of the EXT AP. Setting values cannot be changed on this page.
Version 1.3 4. Web GUI User manual Item Wi-Fi Version Display Description H/W Displays H/W version and S/W version information S/W version for EXT_AP. Enable / Disable status Ethernet IP address Displays network information for Ethernet 0 and Subnet Mask address Ethernet 1. MAC address Enable / Disable status SSID Authentication Wi-Fi Password Displays information on Wi-Fi 2.
Version 1.3 4. Web GUI User manual 4.2.2 Ethernet Displays the setting values of Ethernet0, Ethernet1. Cannot change the setting values for Ethernet0, Ethernet1. Change the Bridge Port address (Log in IP address) User can change the Web UI login IP address. Under the Bridge entry, type the IP address you want to change in the IP address window. After changing the IP address, press the Apply button to change it. After changing the bridge port address, you must log in again to the changed IP address.
Version 1.3 4. Web GUI User manual 4.2.3 Setup Wi-Fi 4.2.3.1 Wired Only Can set wired mode priority Option Enable Disable Description The EXT AP will operate in wired mode. Wi-Fi features are disabled. Enable Wi-Fi function. User can set Wi-Fi features.
Version 1.3 4. Web GUI User manual 4.2.3.2 Set up Wi-Fi features Can be set for Wi-Fi 2.4GHz and 5GHz. Item Wi-Fi Mode Description Supports Wi-Fi 5GHz and Wi-Fi 2.4GHz. Users can select Wi-Fi mode. Can enter up to 64 characters in alphabetic and numeric SSID combinations. For special characters, user can only enter underscores (_), periods (.), and dashes (-). Auth (Authentication) Password Mode BandWidth Channel Region Supports OPEN method and WPA2PSK. Users can choose the authentication method.
Version 1.3 4. Web GUI User manual 4.3 Advanced Settings 4.3.1 Upload The upload function of the Web UI allows various updates of the EXT AP system. Select the update files on the PC connected to the Web UI. Proceed with the Upload and Install procedure. After the update, you must re-login. Item File name rule Description System drtech_system.tar.gz Update the kernel image Firmware drtech_firmware_v1.0.8.tar.gz Script drtech_script.tar.gz Update the script file. Web Source drtech_websrc.
Version 1.3 4. Web GUI User manual 4.3.2 Change the login password User can change the login password. Enter a character with no more than 20 characters. After enter character, push the apply button to change the password.
Version 1.3 4. Web GUI User manual 4.3.3 Rebooting the system This feature reboots the EXT AP system. After rebooting, you must re-login to the Web UI.
Version 1.3 4. Web GUI User manual 4.4 Setup Language The Web UI supports English/Korean/Japanese. User can select the language to use in the Web UI. Use Another language If you want to choose another language, you can add it. You can add another language to Advanced settings / Upload/ Web Language.
Version 1.3 5. Antenna 5. Antenna 5.1 Dipole Antenna - AN2458-5701SM 5.1.1 Sample Photo 5.1.
Version 1.3 5. Antenna 5.1.
Version 1.3 5.
Version 1.3 5.
Version 1.3 5.
Version 1.3 5. Antenna 5.1.
Version 1.3 5. Antenna 5.2 PCB Antenna - APDR-600WT 5.2.1 Sample Photo 5.2.
Version 1.3 5. Antenna 5.2.
Version 1.3 5. Antenna 5.2.
Version 1.3 5. Antenna 5.3 PCB Antenna - APDR-600WS 5.3.1 Sample Photo 5.3.
Version 1.3 5. Antenna 5.3.
Version 1.3 5. Antenna 5.3.
Version 1.3 6. Statement 6. Statement 6.1 FCC Statement FCC ID. RNH-EXTAP Model No. EXT AP Responsible Party DRTECH NORTH AMERICA INC. 10148 International Blvd. West Chester, OH 45246-4846 +1-513-714-4900 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Version 1.3 6. Statement IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). That separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations.
