User manual

WatchMaster
®
IP Elite & Elite 3000 Quick Start Guide
3
 Quick Start Guide (this guide)
 End User Licensing Agreement (EULA)
WatchMaster
®
IP Elite Components and Hardware Kit
Cable Glands and Power Blocks for the WatchMaster
®
IP Elite
3000 (left) and WatchMaster® IP Elite (right)
Installing the IP Elite Camera
You will need the following items (not included) before you can install the
IP Camera (recommended tool list)
 Power source: PoE Switch, 12-24V DC or 24V AC
 IP Network
 Ethernet Cable (STP Cat5 recommended)
 Tripod or Mounting bracket for mounting the IP Camera
 A Phillips head #2 screwdriver
 2 Open End Wrenches – 1 inch (25mm), OR adjustable wrenches
 A 6-inch scale OR ruler
 Torque screwdriver set to 10 inch-pounds (Electric or manual)
 Torx (hole in the middle) T10 Pin-In Security bit – 3.5 inch
(90mm) in Length
 Hex Wrench
 RJ-45 connecter and
 RJ-45 Crimping Tool
 Suggested Tools for Analog Video (IP Elite 3000 only):
o Coax Cable
o Coax Cable Cutter/Stripper
o BNC Connector
o BNC Crimping Tool