PANDA HEADPHONES USER MANUAL
For the very first time, a true audiophile listening experience is no longer reserved for wired headphones. Delivering the lowest distortion ever on a wireless headphone, the Drop + THX Panda puts you closer to your music than you ever thought possible. The world’s first headphones to combine THX’s acclaimed AAA™ linear amplifier technology with premium planar ribbon drivers, the Drop + THX Panda lets you experience sound just as the way it was intended.
TABLE OF CONTENTS 2 WARNINGS 03 SPECIFICATIONS 13 PRECAUTIONS 04 Included in Kit 13 FEATURES 05 General Specs 14 HOW TO USE 06 Wearing 06 Turn On/Off 06 Pair Bluetooth 06 Media Controls 07 Calling Controls 07 Charging 08 TRADEMARKS 18 Wired Use 08 WARRANTY 19 Cleaning 09 LED Meanings 09 ADDITIONAL LANGUAGES 20 Reset Procedure 10 Troubleshooting 11 Power 15 Battery 15 Audio 16 Microphone 16 Physical 17 Optional Accessories 17
WARNINGS Please read and keep all safety and use instructions. ■ ■ ■ ■ ■ This set contains small parts which may be a choking hazard and not suitable for children under age 3. Avoid exposing this product to rain, liquids, moisture and excessive heat. BATTERIES Do not attempt to remove the battery from the headphones or make any unauthorized alterations. Use this product only with an agency approved power supply which meets regulatory requirements. Do not use while driving.
PRECAUTIONS BLUETOOTH ■ ■ ■ 4 The headphones use Bluetooth 5.0, the latest version of the Bluetooth standard. The range of connectivity has limitations and variations. Accessing Bluetooth may not always be possible and it may drop in or out in various circumstances. Due to this, there might be audio delays or other connectivity issues. Connection is not guaranteed. This device complies with part 15 of the FCC Rules and supports security functions in compliance with Bluetooth standards.
FEATURES Adjustable Headband RIGHT EAR Directional Button LED Indicator LEFT EAR Analog 3.
HOW TO USE WEARING The directional button should be on right side. The headband is adjustable. Adjust so the earpieces are comfortably covering the ears. TURN ON/OFF 1 Locate the directional button on the bottom of the right earpiece. 2 To turn on, press and hold for two seconds until the LED indicator turns white. An audio cue will sound. 3 To turn off, press and hold the button for three seconds until the white LED fades. An audio cue will sound.
MEDIA CONTROLS FUNCTION DIRECTION ACTION Play/Pause Press button once Next Track Push button right Previous Track Push button left Volume Up Push button up Volume Down Pull button down Media functions use the directional button. CALLING CONTROLS FUNCTION ACTION Answer Call Press button once End Current Call Press button once Reject Incoming Call Press and hold button Voice Assistant1 Quickly press button twice Calling functions use the directional button.
CHARGING 1 Attach the USB-C cable to the USB-C port on the right earpiece. 2 Connect the USB-C cable to a power source. The headphones can be charged with any 5V/1A or higher DC charger, powered hub, or USB port (not included). ADDITIONAL BATTERY NOTES: ■ ■ ■ ■ ■ ■ ■ 8 As headphones charge, the red LED indicator will fade in and out. A full charge takes approximately two hours with a 5V/1A DC power supply. The headphones can also be quick-charged in 10 minutes for 3 hours of operation.
WIRED USE The headphone has a 3.5mm TRS jack on the bottom of the left earcup which allows the headset to work as a wired passive headphone. The headphone will automatically turn off when a plug is inserted. The directional button will be unresponsive while the plug is inserted. CLEANING The headphones do not require special cleaning. Should cleaning become necessary, simply wipe the outside surfaces with a soft, dry cloth. Avoid using liquids or sprays.
RESET PROCEDURE 1 Locate the directional button on the bottom of the right earpiece. 2 To reset2,connect the headphone to a power source using the included USB cable. Press and hold the button for six seconds until the white LED fades. 3 Then turn on by pressing and holding the button for two seconds until the LED indicator turns white. A reset will result in a loss of all saved settings and stored devices.
TROUBLESHOOTING PROBLEM If sound skips frequently during playback WHAT TO DO ■ ■ ■ ■ Headphones won’t turn on No sound coming through headphones ■ ■ ■ ■ Try turning the bluetooth connection off and on again. Make sure the headphone is properly paired with the headset. The situation may be improved by setting the sound quality mode to “priority on stable connection.” For details, refer to the Help Guide.
PROBLEM WHAT TO DO Battery won’t charge ■ ■ ■ Poor sound quality ■ ■ ■ ■ Headphones won’t connect to Bluetooth ■ ■ ■ ■ 12 How to Use Check that the USB-C cable is securely connected to the headphones and the charger. Try another charging source and/or outlet. If your headphones have been exposed to extreme cold or hot temperatures, let the headphones return to room temperature. Try charging again.
SPECIFICATIONS 1 2 3 4 INCLUDED IN KIT 1 Headphones 4 USB Type-C Cable 2 Neoprene Carry Pouch 5 Drop Sticker 3 Auxiliary 3.
GENERAL SPECS Headphone Type Closed, Planar Magnetic Driver Unit 55m, Ribbon Planar Magnetic Amplification THX AAA-0™ Microphones Dual Wearing Style Circumaural Impedance 26 ohms Frequency Response 10–50,000 Hz THD @ 1kHz / 100dB SPL THD: 94 dB SPL @ 300Hz < 0.
POWER Cable Type USB-C cable Recommended Power Source Can be charged with any 5V/1A or higher DC charger, powered hub, or USB port (not included) Stand by Mode Headphone will automatically enter standby mode after 15 minutes when nothing is playing.
AUDIO Bluetooth 5.0 Effective Range Line of sight, approximately 30 feet (10 meters) Frequency Range 2.4 Ghz Band (2.4–2.
PHYSICAL USB Type-C Cable 48 inches Auxiliary Cable 3.5mm TRS Cable 3.5mm TRS to straight 3.5mm TRS, Single-Sided (Detachable), 48 inches Weight (Headphone Only) 374 grams OPTIONAL ACCESSORIES Boom Microphone Cable 3.5mm TRRS to 3.5mm TRS, 4 feet Y-Splitter Adapter 3.5mm TRRS to split dual 3.
TRADEMARKS THX and the THX Logos are the property of THX Ltd., registered in the U.S. and other countries.
WARRANTY This product includes the Drop 2-year Warranty. For more information on terms, limitations, and how to contact Drop, scan the QR code below, or visit https://docs.drop.com/drop-panda-warranty.
ADDITIONAL LANGUAGES This guide may be available in additional languages. To check for different language, scan the QR code or visit https://docs.drop.com/drop-pandamanual-languages.
FCC ID: 2AWCJ-A990 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Déclaration d'Industrie Canada Cet appareil est conforme à la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interférence nuisible. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Visit drop.com to find out the latest information on this product and more. facebook.com/drop twitter.com/drop instagram.com/drop © 2020 Drop, Inc. Rev 1.
