Data Sheet

5
放电倍率特性
10C ≥95%
Discharge:Each rate,CC,9.0Vcut-off
测试温度:25±2℃
充电：0.5C恒流恒压充到12.6V，电流≤0.05C 截
止
放电：每种倍率恒流放电，截止电压 9.0V
60A ≥80%
2
Temperature
Dependence
of capacity
容量温度特性
40℃ ≥90%
Charge:0.5C, CC/CV,12.6V, current≤0.05C cut-off,
at 25±2℃
Discharge: 0.2C,CC,9.0V cut-off at setting
temperature
Interval for temperature’s change is 2Hrs
充电：在 25±2 ℃0.5C恒流恒压充电到12.6V，电
流≤0.05C 截止
放电：在设定温度，0.2C 恒流放电9.0V 截止，
温度变化间隔是 2 小时
25℃ 100%
0℃ ≥85%
-10℃ ≥70%
3
Cycle Life Characteristics
循环寿命特性
≥300cycle
Capacity≥1040mAh
Charge: 0.5C CC/CV,12.6V,0.05C cut-off
Discharge:1C CC9.0V cut-off
容量≥1040mAh
充电：0.5C恒流恒压充电到 12.6V,0.05C 截止
放电：1C恒流放电 9.0V 截止
4
Self-discharge 自放电
≥85%
Standard charge,under the condition of 25±2℃
storage one months,tests of 0.5C till 9.0V discharge
capacity
标准充电后，在25±2℃条件下贮存1个月，测试
0.5C放电至9.0V的容量
5
High temperature performance
高温性能
≥85%
After standard charge in 55±2℃ environment on
hold for 4 hours,the test of 0.5C till 9.0V discharge
capacity
标准充电后，在 55±2℃的环境下搁置 4 小时，测
试 0.5C 放电至 9.0V 的容量
4.2 Mechanical Characteristics 机械性能
NO.
序
号
Item 项目 Criterion 标准 Test Method 测试方法