Technical data

Page 10 of 15
LIGHTING (CONT’D)
• Place the flow regulating handle on the "1" position, as soon as the oil has started flowing into the
burner, return to "0" position.
• Open the door and pore into the burner 2 to 3 once (75 ml) of lighting gel or wood alcohol.
NOTE : USING LIGHTING GEL IS BETTER FOR A SAFE IGNITION.
• With a long wood match or a BBQ lighter ignite carefully and close the door.
• After a couple of minutes (before alcohol goes out) the burner and the chimney are will have
warmed, place the flow regulator handle on "1" position.
Note : Do not leave matches or other materials in the burner in order to keep it
clean. It allows a better combustion.
IF YOU MISS THE APPLIANCE’S LIGHTING, ALWAYS WAIT FOR THE
BURNER TO COOL DOWN TO ROOM TEMPERATURE BEFORE USING
BURNING ALCOHOL AGAIN.
IF, FURTHER TO SOME MISOPERATION, THE BURNER FINDS ITSELF
WITH AN EXCESS QUANTITY OF OIL, ALL OF THE OIL MUST FIRST BE
REMOVED BEFORE LIGHTING THE APPLIANCE AGAIN.
CHANGING INTENSITY
• Always wait 10 minutes minimum before increasing the flow (between each position). This allows flame to
stabilize and prevents soot build-up.
• No waiting is needed to decrease the flow.